[nSLUG] Video Card Issues

Matt Chamberlain chamberlain2007 at gmail.com
Mon Feb 4 12:00:39 AST 2008


I noticed that setting and made sure it was enabled.  I'm not sure what you
mean by "PCI Express Frequency", though.

On Thu, Jan 31, 2008 at 7:27 PM, Rich <budman85 at eastlink.ca> wrote:

>  Check the IRQ settings - is the "allocate IRQ to PCI VGA" enabled (under
> advanced PCI/PnP settings)
>
> Also, PCI Express Frequency ?
>
>
>
>
>
> Matt Chamberlain wrote:
>
> The BIOS is up to date, made sure of that.  It's really weird, I can't
> find any option to disable the onboard video anywhere.  I'll keep searching
> on the internet.
>
> On Thu, Jan 31, 2008 at 6:32 PM, David Potter <dlpotter at ns.sympatico.ca>
> wrote:
>
> >
> > There is a very high probability that there is some way to disable the
> > on-board video... if there is no bios setting then there should be a jumper
> > on the board. Maybe the bios need to be updated?
> >
> > David Potter
> >
> >
> > Matt Chamberlain wrote:
> >
> > No dice, I tried changing that option, but there was no disable option.
> > Any other suggestions?
> >
> > On Thu, Jan 31, 2008 at 5:49 PM, Greg O'Brien <gregmcal at eastlink.ca>
> > wrote:
> >
> > >  Sounds like you need to either disable the on-board video n the bios
> > > on in UBUNTU
> > >
> > >
> > >
> > > Greg O'Brien
> > >   ------------------------------
> > >
> > > *From:* nslug-bounces at nslug.ns.ca [mailto:nslug-bounces at nslug.ns.ca] *On
> > > Behalf Of *Matt Chamberlain
> > > *Sent:* January 31, 2008 11:54 AM
> > > *To:* Nova Scotia Linux User Group
> > >  *Subject:* Re: [nSLUG] Video Card Issues
> > >
> > >
> > >
> > > I've changed the primary graphics adapter setting, but no luck.  It
> > > doesn't seem to make any difference.  I do get video from the onboard, even
> > > after I've put in the new card.  Thanks!
> > >
> > > On Thu, Jan 31, 2008 at 11:36 AM, Bill Davidson <
> > > billdavidson at eastlink.ca> wrote:
> > >
> > > Hi:
> > >
> > >
> > >
> > > Probably a silly question, but did you make any changes in the BIOS
> > > setup to use the new card?  I see the ASUS BIOS has a couple of settings:
> > > "Initiate Graphic Adapter" and "Primary Graphic Adapter".   The latter one
> > > in particular sets the priority for detecting adapters either to
> > > PCIE->PCI->IGP or IGP->PCI->PCIE.  I assume "IGP" means "Internal Graphics
> > > Adapter" or something like that, so perhaps if it is set to the latter then
> > > it stops after detecting the internal?
> > >
> > >
> > >
> > > Anyway, I would try tweaking a few of those settings.  I note the MB
> > > allows you to change the PCIE bus speed -- you mat wat to make sure that is
> > > either "Auto" or a low speed at first.
> > >
> > >
> > >
> > > Qusetion:  When the new adapter is in place, if you connect your
> > > monitor to the on-board do you get a signal there?
> > >
> > >   ----- Original Message -----
> > >
> > > *From:* Matt Chamberlain <chamberlain2007 at gmail.com>
> > >
> > > *To:* nslug at nslug.ns.ca
> > >
> > > *Sent:* Wednesday, January 30, 2008 6:11 PM
> > >
> > > *Subject:* [nSLUG] Video Card Issues
> > >
> > >
> > >
> > > Hi there everyone.  This is not a Linux specific issue, but rather, a
> > > suspected hardware one.  In September I bought a new system (Asus M2N-MX
> > > motherboard, AMD Athlon 64 X2 5200+ CPU, 1 GB RAM).  On Boxing Day I bought
> > > a new EVGA e-GeForce 8600 GT SuperClocked 256MB video card.  I installed it
> > > into the PCI-E slot in my computer, but no luck.  The fan started,
> > > indicating that it had power, but no signal, and it wasn't recognized at all
> > > in Ubuntu, or Windows.  I confirmed that the card does work on another
> > > computer, but not this.  Any ideas?
> > >   ------------------------------
> > >
> > > _______________________________________________
> > > nSLUG mailing list
> > > nSLUG at nslug.ns.ca
> > > http://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
> > >  ------------------------------
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG Free Edition.
> > > Version: 7.5.516 / Virus Database: 269.19.17/1252 - Release Date:
> > > 1/30/2008 8:51 PM
> > >
> > >
> > > _______________________________________________
> > > nSLUG mailing list
> > > nSLUG at nslug.ns.ca
> > > http://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
> > >
> > >
> > >
> > >  No virus found in this incoming message.
> > > Checked by AVG Free Edition.
> > >  Version: 7.5.516 / Virus Database: 269.19.17/1252 - Release Date:
> > > 30/01/2008 8:51 PM
> > >
> > > No virus found in this outgoing message.
> > > Checked by AVG Free Edition.
> > >  Version: 7.5.516 / Virus Database: 269.19.17/1252 - Release Date:
> > > 30/01/2008 8:51 PM
> > >
> > >
> > > _______________________________________________
> > > nSLUG mailing list
> > > nSLUG at nslug.ns.ca
> > > http://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
> > >
> > >
> > ------------------------------
> >
> > _______________________________________________
> > nSLUG mailing listnSLUG at nslug.ns.cahttp://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
> >
> >
> >
> >  --
> >
> > _______________________________________________
> > nSLUG mailing list
> > nSLUG at nslug.ns.ca
> > http://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
> >
> >
> ------------------------------
>
> _______________________________________________
> nSLUG mailing listnSLUG at nslug.ns.cahttp://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
>
>
> _______________________________________________
> nSLUG mailing list
> nSLUG at nslug.ns.ca
> http://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nslug.ns.ca/mailman/private/nslug/attachments/20080204/aa9a03d3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 17251 bytes
Desc: not available
URL: <http://nslug.ns.ca/mailman/private/nslug/attachments/20080204/aa9a03d3/attachment.jpe>


More information about the nSLUG mailing list