[nSLUG] Replaced CD drive - won't boot, won't play, players don't recognize

Robert Ashley rb.ashley at gmail.com
Tue Jul 31 02:28:13 ADT 2007


Yup, tried an audio CD. No luck. Tried both cdtools from the console
and the CD Player in the GUI. The latter says "no disk" and won't let
me use any of the "play", "pause" buttons, except "eject". Eject
works.

On 7/31/07, Rich <budman85 at eastlink.ca> wrote:
>
>
> Robert Ashley wrote:
> > Thanks Jon.
> >
> > Here's the output from your suggestion:
> >
> > ashley:/home/bob# mount /dev/hdc /media/cdrom0 -tiso9660
> > mount: block device /dev/hdc is write-protected, mounting read-only
> > mount: wrong fs type, bad option, bad superblock on /dev/hdc,
> >        missing codepage or other error
> >        In some cases useful info is found in syslog - try
> >        dmesg | tail  or so
> > ****************
> > Same raw deal as what I tried. BTW, in googling around, I found plenty
> > of forum messages which raise this problem, but so far I haven't read
> > of any successful remedy.
> >
> > What about something possibly awry in the symlink angle?
> >
> Not related to symlink - those are handled by hotplug and udev daemons.
>
> Do you have another CD or DVD to try ?
> Sounds like the fs that was recorded does not match the fs you are
> specifying in fstab
> _______________________________________________
> nSLUG mailing list
> nSLUG at nslug.ns.ca
> http://nslug.ns.ca/cgi-bin/mailman/listinfo/nslug
>



More information about the nSLUG mailing list